HobbyKing
TURNIGY NANO-TECH 5000MAH 10S 25~50C LIPO PACK
: 5000mAh, : 10S1P / 10 Cell / 37V, : 25C Constant / 50C Burst, : 1305g (including wire, plug & case), : 305x53x42mm, : JST-XH, Discharge Plug:, 4mm bullet-connector, Suited to the following models:, MIKADO LOGO600/600SE, HENSELEIT TDR, MA Furion 6,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
FC 28-22 BRUSHLESS OUTRUNNER 1200KV
| Weight | 39g (with wire & sticker etc) |
| Shaft | 3mm |
| Motor Length | 46mm |
| Diameter | 28mm |
| Stator Size | 22x10mm |
| Suggested prop | 9~10inch |
| Voltage | 11.1v (3S) |
| Prop size | 10x5 |
| RPM | 7100 |
| Max Curr | 14.5A |
| Thrust | 710g (1.51lb) |
| Prop size | 10x4.7 SF |
| RPM | 6100 |
| Max Curr | 14.5A |
| Thrust | 745g (1.64lb) |
Kv: 1200RPM/V,
Tiny but mighty! A well made and nicely finished outrunner. ...5 Reviews
HobbyKing
DECATHLON EP 48.9 INCH ARF
Decathlon EP 48.9 inch ARF Laser cut ply & balsar.Includes mount, alloy tubing and accessories.A very light weight yet strong aerobatic trainer. Great fun to fly and very striking in typical Decathlon livery. SPECIFICATIONSWingspan : 1243mmLength : 842.5mmWing Area : 23.6dm2Suggested Motor: Turnigy 28-XX size Recomended ESC: 30ASuggested Prop: 10x6~11x6 Weight (without motor/battery etc.): 720g *Kit is double cargo boxed to ensure protection in shipping.,
5 Reviews
HobbyKing
APPARITION OFFSHORE BRUSHLESS RC TWIN HULL (800MM)
| Length | 800mm |
| Width | 240mm |
| Height | 120mm |
| Weight | 4kg |
| Motor | 36-60 Size |
| ESC | 125A watercooled |
| ESC | 125A watercooled (required) |
5 Reviews
HobbyKing
POLYQUEST 2200MAH 5S 20C - 30C LIPOLY
| Capacity | 2200mAh |
| Cell Model | PF 7832100XP |
| Voltage | 18.5V |
| Charge Current(2C) | 4.4A |
| Continous Dis.(22C) | 48.4A |
| Dimension(mm) | 115 * 32 * 46 |
| Weight | 275g |
| http | //www.enerland.com/product/p1.php?num1=1&img=y |
| http | //www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=4286 |
5 Reviews
HobbyKing
GWS NARO SUPER 19G DIGITAL SERVO/JR & GYRO
| Model | Naro Super D/JR |
| Voltage | 4.8v~6.0v |
| Speed | .077sec |
| Torque | 3.6kg/cm |
| Weight | 19g |
| Input Voltage | 4.8V~6.0 V |
| Current Consumption | 10mA |
| Operation Temp | -5~60C |
Dimension:, 26.0x27.0x11.3 mm (1.02x1.06x0.45 in ), Weight:, 7.0 g (0.285oz) with Plastic Case, Gain Adjustment:, Single rate, non-remote, Applicable R/C System:, Futaba, JR,Hi-tec, Sanwa / Airtronics,Multiplex, GWS,
GWS Naro Super 19g Digital Servo GWS Piezo Gyro PG-035 Reviews
HobbyKing
PHOENIX 2000 EPO COMPOSITE R/C GLIDER (PLUG & FLY)
| Wingspan | 2 meters (78.74inch) |
| Length | 1160mm |
| Flying Weight | 980g |
| Battery required | 1500mAh 3S |
| Motor | Brushless 2815/1050Kv |
| ESC Included | 30A |
5 Reviews
HobbyKing
F4 PHANTOM II FIGHTER R/C DUCTED FAN JET PLUG-N-FLY
| Wingspan | 628mm |
| Length | 1000mm |
| Flying Weight | 620g |
| Channel | 4ch |
| ESC | 30A |
| Servo | 4 x 9g |
| EDF | 64mm |
| Battery compartment size | 150 x 37 x 37mm |
| Required | Your own Tx & Rx |
Specification:, Motor:, 4300kv Brushless outrunner,
A nicely scaled F4 Phantom II fighter jet with brushless ...5 Reviews
HobbyKing
DIGITAL HIGH TORQUE BEARING SERVO 42G/6.5KG/.14SEC
| Model | HD-5680BB |
| Voltage | 4.5v~6v |
| Speed | .14sec |
| Torque | 6.5kg/cm |
| Bearings | 2BB |
| Gears | Plastic |
| Weight | 42g |
| Size | 40.7x20x39.4mm |
5 Reviews
HobbyKing
T-45 GOSHAWK R/C 64MM EDF JET EPO KIT ONLY
| Specification | Wingspan |
| Length | 1000mm |
| Wing loading | 36g/dm2 |
| Main wing area | 18sq/dm |
| Flying Weight | 620g |
| Channel | 4ch |
| Motor | B3830 Brushless Outrunner 4300kv (NOT INCLUDED) |
| ESC | 30A (NOT INCLUDED) |
| Servo | 3 x 9g (NOT INCLUDED) |
| EDF | 64mm (NOT INCLUDED) |
| Battery compartment size | 107 x 39 x 33mm |
| Required | Your own Tx & Rx |
5 Reviews
HobbyKing
HITEC HS-81 MICRO SERVO 2.6KG/16G/0.11SEC
| Motor Type | 3 Pole |
| Bearing Type | Top Ball Bearing |
| Speed @ 4.8v | 0.11 sec @ 60 deg. |
| Speed @ 6v | 0.09 sec @ 60 deg. |
| Torque @ 4.8v | 2.6 kg.cm |
| Torque @ 6v | 3.0 kg.cm |
| Size | 30 x 30 x 12mm |
| Weight | 16g |
Specifications:,
Hitec HS-81 Micro Servo 2.6kg/16g/0.11sec You get two choices with ...5 Reviews
HobbyKing
HITEC HS-805BB MEGA 1/4 SCALE SERVO 19.8KG/152G/0.19SEC
| Motor Type | 3 Pole |
| Bearing Type | Dual Ball Bearing |
| Speed @ 4.8 | 0.19 sec @ 60 deg. |
| Speed @ 6v | 0.14 sec @ 60 deg. |
| Torque @ 4.8 | 274.96 oz.in / 19.8 kg.cm |
| Torque @ 6v | 343.01 oz.in / 24.7 kg.cm |
| Size | 66 x 30 x 57mm |
| Weight | 152g |
Specifications:,
Hitec HS-805BB Mega 1/4 Scale servo 19.8kg/152g/0.19sec Known as the ...5 Reviews
HobbyKing
TURNIGY AE-25A BRUSHLESS ESC
| Output | Continuous 25A, burst 35A up to 10 seconds. |
| Input Voltage | 2-4 cells lithium battery or 5-12 cells NIMH battery. |
| BEC | Linear 2A @ 5V |
| Control Signal Transmission | Optically coupled system. |
| Max Speed | 2 Pole |
| 6 Pole | 70,000rpm |
| 12 Pole | 35,000rpm |
| Size | 50mm (L) * 26mm (W) * 12mm (H). |
| Weight | 25g. |
| Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
| Factory default settings | Brake |
| Battery type | Li-xx (Li-ion or Li-Po) |
| Low voltage cutoff threshold | Soft cut-off (2.6V) |
| Timing setup | Low |
| Soft Acceleration Start Up | Normal |
| Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 3300MAH 6S 25~50C LIPO PACK
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec.Capacity: 3300mAhVoltage: 6S1P / 6 Cell / 22.2VDischarge: 25C Constant / 50C BurstWeight: 489g (including wire, plug & case)Dimensions: 145x53x37mmBalance Plug: JST-XHDischarge Plug: 4mm bullet-connectorSuited to the following models: 6S: LOGO500, GAUI EP425/550/X56S x 2: MIKADO LOGO500SE/600/600SE, ALIGN T-REX600, HENSELEIT TDR, Compass Atom 6HV, Outrage Fusion 50 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling,
5 Reviews
HobbyKing
FC 28-12 BRUSHLESS OUTRUNNER 1534KV
| Weight | 39g (with wire & sticker etc) |
| Shaft | 3mm |
| Motor Length | 46mm |
| Diameter | 28mm |
| Stator Size | 22x10mm |
| Suggested prop | 7x4 or 7x6inch |
| Voltage | 11.1v or 14.8v (3-4S) |
| Prop size | 7x4 |
| RPM | 12250 |
| Max Curr | 10.5A |
| Thrust | 580g (1.27lb) |
| Prop size | 7x6 |
| RPM | 11000 |
| Max Curr | 15.5A |
| Thrust | 730g (1.61lb) |
Kv: 1534RPM/V,
Tiny but mighty! A well made and nicely finished outrunner. ...5 Reviews